ADVANTAGES OF THE “BEAM GAS COMPRESSOR™” The BGC™ increases cash flow and production on existing wells. The BGC™ utilizes the pumping unit as its prime mover and energy source. The BGC™ moves liquid vapors down line with the gas and does not require a liquid dropout system during compression. The BGC™ has few moving parts to wear out. It has NO gearbox or crankcase. The BGC™ can be designed to operate in H2S and other corrosive environments. The BGC™ is easy to install and the installation is simple because there are no complicated electrical controls or regulators. The BGC™ is very portable and can be moved to other pumping wells with little effort. The BGC™ has a good history of quick payout ranging from less than one month to one year. This depends on what your formation will give up by reducing the backpressure. The BGC™ requires almost no maintenance or adjusting. The BGC™ acts as a shock absorber for your rod pumping system at the point of the rod reversal. Home | General Information | Applications | Advantages | Installations | Case Histories | Rental Program | Well Data Sheet | Gallery | Contact | Spanish ©2010 Permian Production Equipment, Inc. All Rights Reserved. For a printable brochure on the Advantages of Beam Gas Compressors™, click here.  The BGC™ prevents gas locking on  your downhole pump by moving the gas up the casing and away from the down hole pump resulting in increased pumping efficiency of the downhole pump.